BlogDevice checks

Keyboard Not Working? Find the Keys That Fail

A step-by-step check for dead, sticky and double-typing keys, and the fixes that solve most keyboard problems.

When a keyboard stops working, first find out which keys fail and how. If no key works, the cause is the connection (cable, receiver, battery or Bluetooth). If only some keys fail, it is usually dirt under the keys, or a setting such as Filter Keys or the wrong keyboard layout. Here is how to check each one, from the simplest fix to the least likely.

Step 1: find out which keys fail

Open the keyboard test, press Start, and press every key once. Each key lights up when the computer receives it. Look for three kinds of problem:

  • Dead keys stay grey however you press them.
  • Sticky or unreliable keys only register when pressed hard or in one spot.
  • Wrong keys light up a different key from the one you pressed, or type the wrong character.

If no key works at all, skip to the connection checks below. If most keys work and a few do not, the cause is usually dirt or wear. If keys type the wrong characters, it is almost always a layout setting.

Nothing works at all

  1. Check the connection. Unplug a USB keyboard and plug it into another port, ideally directly on the computer rather than through a hub.
  2. Wireless keyboard? Replace or charge the batteries, check the on/off switch, and re-pair Bluetooth or re-plug the USB receiver.
  3. Restart the computer. It sounds too simple, but it clears many stuck drivers.
  4. Try another computer. If the keyboard fails there too, the keyboard is faulty. If it works, the problem is on the first computer.

Some keys do not work

  • Clean it. Turn the keyboard upside down and shake it gently, then use compressed air around the problem keys. Crumbs and dust under a keycap are the most common cause.
  • After a spill, unplug the keyboard straight away and let it dry fully, for a day or more, before trying again. Sugary drinks often leave keys sticky for good.
  • Number pad dead? Press Num Lock. When it is off, the number keys act as arrows instead.
  • Keys need a long press? On Windows, a setting called Filter Keys makes the computer ignore short key presses. Look for it under Accessibility, Keyboard, and turn it off.

Keys type the wrong characters

If Y and Z are swapped, or symbols such as @ and " are in the wrong place, your computer is using a different keyboard layout from the one printed on the keys. Check the language or input setting in the taskbar (Windows) or menu bar (Mac) and choose the layout that matches your keyboard. The keyboard test shows each key's physical position, which helps you see whether the key or the layout is at fault.

Keys fail when pressed together

Some keyboards cannot register more than a few keys held down at the same time. Extra keys are simply ignored, which is called ghosting or limited key rollover. It matters in games where you hold several keys at once. Hold a group of keys in the keyboard test and watch the "most at once" number. Gaming keyboards are built to register many keys at once; cheaper office keyboards often are not.

Laptop keyboard not working

A laptop keyboard cannot be swapped as easily, so rule out software first: restart, check the layout, and turn off Filter Keys. Plug in a USB keyboard to see whether the laptop accepts typing at all. If the built-in keyboard still fails after all that, it is likely a hardware fault for a repair shop.

Once your keyboard works again, see how fast you can type on it with the typing test.

Try it yourselfPress every key and spot the ones that do not work.Open the Keyboard Test

Keep reading