How to test your speakers or headphones
A sound test plays a short sound on one side at a time. If you hear it only on the side that lights up, your left and right channels work and are not swapped. The sweep checks how low and how high your speakers can play.
- Set your volume to about a third, especially with headphones.
- Press Play left, then right. Watch which side lights up and listen.
- Use Left or Right to repeat one side, and Bass to treble sweep to hear the full range.
What the results mean
| You hear | What it means |
|---|---|
| Left on the left, right on the right | Everything works |
| Both sounds from both sides | Mono mode is on, or a mono speaker. Check accessibility audio settings. |
| Left and right are swapped | Headphones on the wrong ears, or the channels are swapped in your sound settings |
| One side is silent | Balance is set to one side, a loose plug, or a broken earbud or speaker |
| Nothing at all | Wrong output device, muted, or the browser tab is muted |
No sound?
- Output device. Click the speaker icon in the taskbar or menu bar and choose the speakers or headphones you want.
- Mute. Check the volume keys, the headset switch and whether this browser tab is muted.
- Balance. In Windows Sound settings (device properties) or Mac Sound settings, make sure balance sits in the middle.
- Bluetooth. Disconnect and reconnect, then press Play again.
Questions
How low and high can people hear?
Roughly 20 Hz to 20,000 Hz, and the top end drops with age. The sweep here runs from 40 Hz to 16,000 Hz. Small laptop speakers and phones usually play little below about 150 Hz, so the start of the sweep may be quiet on them; that is normal.
Is this sound test safe for my speakers?
Yes, at normal volume. The sounds are short and quiet. Start low with headphones and turn up slowly.
Does it work on a phone?
Yes. Phone speakers are often mono or very close together, so use headphones to check left and right.


